The clean room config. BFD-10 freeze dryer perfect fit laboratories and pilot plants that require a higher hygiene level. Machine front door is mounted on clean room wall for product loading and unloading, machinery part will be installed in technical room. This design minimum your install space and avoid noise.

Vikumer’s standard BFD-10 freeze dryer is designed to perform bulk material drying, raw products load in trays, freezing and sublimation drying. There are 0.94m2 trays area enable load raw product, batch load 9.4kgs at 10mm thick in trays.

Technical Specifications

Model BFD-10
Shelf Area 0.94m2
No. of Shelves 6+1
Shelf Size 355*455mm
Shelf Spacing 50mm
Shelf Temp. -55C ~ +70C
Vacuum <1Pa
Condenser Capacity 10Kgs/24Hrs, 20Kgs Total
Condenser Temp. -85C
Power 7.5Kwh
Size W/900*D/1600*H/1700mm

Technical Features

  • Box type body, plug and play deliver.
  • Stainless steel 304 fabricated drying chamber, shelves, trays and condenser.
  • Rectangular drying chamber, maximum space use and temperature uniformity guarantee.
  • Drying chamber interior polish Ra<0.6um.
  • Acrylic drying chamber door, lubricate free gasket.
  • Sandwich type shelves, silicone oil based system, temperature controllable from -55C to +70C.
  • S/S304 shelves flatness <0.5mm/m.
  • Shelves upper and bottom polish Ra<0.4um.
  • Individual ice condenser connect with chamber by a spool piece.
  • Condenser lowest -85C.
  • Condenser coils surface polish Ra<0.4um.
  • Condenser auto defrost.
  • 2-stage oil sealed rotary vacuum pump, velocity 16m3.
  • System final pressure <1Pa.
  • Vacuum adjustable.
  • 3HP + 3HP cascade refrigeration system, air cooled.
  • 2x800w fluid heating bar.
  • PLC and HMI based control system, same functions as industrial units.