FD-10L Freeze Dryer

9.7m2 trays area, 200kgs ice condenser capacity.

Introduction

The Vikumer FD-10L is a medium capacity lyophilizer that fits commercial and factory heavy use. It has a wide application range, from normal food, nutraceuticals to valuable drugs and pharmaceuticals. Freeze drying products in trays, under vacuum environment and is fully automatically.

The FD-10L freeze dryer is entirely stainless steel fabricated, that can meet even the strictest hygiene requirements. And the machine is using proven, standardized modular sub-systems, which is under international standard, easy to install and maintain. FD-10L offers 9.7m2 shelf area and 200kgs ice condenser capacity. As a commercial freeze dryer, the freeze dry system is robust design, to meet 7*24*365 heavy use. And adapt to any industries and applications include enzymes, probiotics, bacteria, chemical, food and pharma lyophilization.

Control of the machine is through a user-friendly touch screen HMI, which is PLC based. Authorized FD-MEGA software was programmed in HMI, to assist operator precisely control of the freeze drying process, and monitoring system working status. Operator can select either automatic working or semi-automatic working, of course.

FD-10L Freeze Dryer

Technical Parameters

Model FD-10L
Shelves Area 9.7m2
No. of Shelves 9+1
Shelf Size 900*1200mm
Shelf Spacing 50mm
Shelf Temp. -55C ~ +70C
Vacuum <1Pa
Condenser Capacity 100Kgs/24Hrs, 200Kgs Total
Condenser Temp. -85C
Power 50Kwh
Size 1700*5500*2500mm

Key Benefits

All in one design. All the components that involved with the operation of it well mount on a steel frame. Plug and play deliver.

Address to all industries, for bulk materials freeze drying. Allow raw material in any forms include, granular, liquid, powder, paste etc. Freeze drying in trays or prepackaged containers.

Freeze drying capacity refers to its water collect capacity in 24hours, that is, 100kgs for FD-10L. Recommend total water in raw material less than 100kgs, and allow maximum water in raw material 200kgs.

Raw product pre-freezing can be done in external freezer or inside freeze dryer. Shelves can freeze product as low as -50C.

Fully automatic freeze drying, from product pre-freezing to vacuum drying.

For each product, operator can program the corresponding/suitable freeze drying recipe.

Hundreds of recipes can be stored in control system and, for each recipe, operator can program up to 36 steps (individually set shelf temp. lasting hours and vacuum).

Shelves cooling and heating rate >1C/MIN. Condenser chill to -40C within 30MIN. Chamber pressure drop to 1mbar within 40MIN.

All components in drying chamber and condenser are stainless steel 304 fabricated, with state-of-the-art craftsmanship. CFC free compressor system. Sub systems and accessories are under international standard, easily to maintain and replace.

Allow operator set safety heating data, for example, vacuum low and high margin, shelf temperature margin, shelf temperature ramp reduce or raise, overheat alarm and heater power auto cut off.

Related Products

FD-5L Freeze Dryer

FD-5L Freeze Dryer (5.25m2 Shelf 50Kgs Condenser)

FD-20L Freeze Dryer

FD-20L Freeze Dryer (19.8m2 Shelf 200Kgs Condenser)

Bulk Production Freeze Drying Machine

All Our Bulk Production Lyophilization Machines