Category: Laboratory Freeze Dryer
LGJ-10 Laboratory Benchtop Freeze Dryer with -80C Condenser
The LGJ-10 freeze dryer with -80C condenser is suitable for freeze drying low eutectic point materials. The upright stainless steel ice condenser has a physcial volume of 5.5L and can collect up to 3kg of vapor in 24hrs.
Technical Parameters
| Model | LGJ-10 (-80C) |
|---|---|
| Condenser Temperature | -80C |
| Condenser Capacity | 3Kgs/24Hrs |
| Power Install | 1180W |
| Voltage | 110V/60Hz/1P, 220V/50Hz/1P |
| Base Unit Size | W/520*D/680*H/525mm |
| Base Unit Weight | 65Kgs |
Technical Features
- Portable benchtop design, small footprint save valuable laboratory space.
- Powder coated steel exterior with rubber feet, easy install.
- S/S304, upright ice condenser with 5.5L capacity.
- Smooth wall type ice condenser enables freezing the samples inside, and is easy defrost.
- 2 sets hermetic compressor can pull ice condenser down to -80C.
- Full color, 7″ touch screen controller with LYO-LAB:
- Real-time display chamber pressure, condenser and product temperature.
- Real-time drying trend.
- Data-logging and can be exported via USB.
- System time set, vacuum pump oil change alert, sensors calibration etc.
- Vacuum unit change between Pa and mBar.
- System protection vacuum pump cannot be activated if condenser temperature higher than -40C.
- System protection vacuum pump auto shut off if chamber pressure not reduce.
- Side mounted vacuum connection and vacuum break valve.
- Side mounted condenser drain connection and valve.
- Rear mounted vacuum pump power socket.
